KNX- MITSUBISHI ELECTRIC AC (100 Groups). City Multi with AG-150A, G-50A, GB-50A or GB-50ADA

Zoom f088bb68c4585fed2ff9ec03970eee307fd355241f33101dad7edd4f92b5fd6e

INTESIS ME-AC-KNX-100

KNX- MITSUBISHI ELECTRIC AC (100 Groups). City Multi with AG-150A, G-50A, GB-50A or GB-50ADA

Product code: ME-AC-KNX-100

Integrate Mitsubishi Electric City Multi Air Conditioning systems into KNX via Mitsubishi Electric G50 gateway.

Description

The G50 interface of IntesisBox

IntesisBox can talk to up to 2 Mitsubishi Electric G50s using XML protocol and offers the signals of all these City Multi groups through its KNX EIB interface, allowing up to 100 groups of air conditioners to be integrated into KNX. The AG-150A can be used with Expansions Cards as explained in the section IntesisBox capacity.

The KNX interface of IntesisBox

IntesisBox simulates a KNX device and acts as if it was one more device into the KNX system. The IntesisBox's KNX EIB interface connects directly to the EIB bus and is opto-isolated from the rest of the internal electronics.

The configuration of IntesisBox

IntesisBox KNX series are configured using LinkBoxEIB, a software tool for windowsTM which is supplied along with the purchase of IntesisBox with no additional cost. With the standard installation of LinkBoxEIB, a Demo project for integration of G50 devices is also installed, using this demo project makes the engineering needed for this integration easy and quick, almost plug&play.

Additional Requirement

This integration requires the Mitsubishi Electric City Multi AC system be equipped with the Mitsubishi Electric G-50A, GB-50A or AG-150A gateway which allows access to the signals of up to 50 groups of indoor units, no matter the number of outdoor units installed. In the G50, the group is the control unit, every group can have from 1 to 16 associated indoor units.
This G50 gateway is supplied by Mitsubishi Electric. Contact your nearest Mitsubishi Electric distributor for details.